Overview
KLIMA NEW BUILDING for new constructions
This is the radiant floor system specific for new construction systems or situations with no limits for installation thickness.
It can include insulated panels with or without protuberances, thus satisfying every kind of application requirement of residential or commercial sectors.
Rapid and easy panel fitting and pipe positioning, various thicknesses available for all needs of thermal insulation. Available among others are the versions suitable for pipe diagonal laying and with specific acoustic insulation properties.
KLIMA RENEW for requalification works and reduced installation thicknesses
A system designed to satisfy the growing need of radiant floors, also with very reduced installation thicknesses available: the winning solution for renovation works. It can include the innovative Spider plastic panels, featuring circuits identical to more traditional versions and very reduced losses of pressure, or with fiber-plaster panels already grooved for pipe fitting. All KLIMA RENEW products guarantee an extremely reduced thermal inertia to achieve a rapid operational regime after attenuation or deactivation of the radiant floor.
KLIMA DRY for screed-free applications
The screed-free radiant floor perfect for interventions in which the weight on the structures must be limited (e.g. for renovation works or galleries): the absence of concrete screeds used to support the surface finish satisfies this major requirement while reducing installation times and thicknesses required by system. The layer supporting the floor finish is obtained through dry installation of a double layer of galvanized steel plates which guarantee an even distribution of the mechanical loads.
KLIMA WALL for wall thermal integration
The radiant wall system for all situations where other radiant installations are not feasible or, more frequently, where a thermal integration is required.
Radiant wall circuits can be derived directly from the distribution manifolds of the floor system.
Pipes, fittings and pipe accessories
For all the radiant systems offered, wide range of pipes and specific fittings for the connection to the other components of the system. Pipes in extremely flexible PEX-b, in PE-RT, both with anti-oxygen barrier, or in multi-layer PEX-b/Al/PEX-b. Useful accessories such as bend supports, unrollers, clips and fastening equipment complete our offer to facilitate to the utmost the installation operations.
Manifolds, pre-assembled units, cabinets and other distribution elements
In a radiant panel system, the manifolds perform a fundamental function: hydraulically supply every single circuit with the necessary flow for its optimal operation. But not all the systems have the same requirements and for this reason we make available a wide range of possibilities: from the individual components, to build distribution and mixing units based on the most diverse installation situations, to the practical pre-assembled and pre-wired manifolds that offer completeness, simplicity of installation and time saving. All the manifolds can be housed in specific metal cabinets for easy calibration and maintenance of the system.
Advantages
- Maximum environmental comfort (uniform distribution of the horizontal and vertical temperatures, absence of drafts and dust circulation, silent operation)
- Efficient energy consumption for the entire life of the building (lower comfort temperature compared to that of traditional radiator systems, for an energy savings of 7÷8% for every degree less of the air)
- Ideal climate for all seasons, given that a single system is suitable for heating in the winter and cooling in the summer
- Thanks to the operation with water at less extreme temperatures, it is ideal in combination with high efficiency generators (such as condensing boilers and heat pumps) and provides efficient use of renewable sources (such as geothermal and solar thermal).
- Maximum architectural freedom, thanks to the absence of terminals in the room
- No maintenance
- For new constructions and restorations in both the residential and tertiary/industrial sectors
- Single producer to guarantee a wide range of complete, reliable and economical solutions
- Large product catalogue, for all fields of application (new construction and restorations, residential and tertiary/industrial)
- Ideal in combination with high efficiency generators, such as condensing boilers and heat pumps
- Possibility of effective use of renewable sources, such as geothermal and solar thermal
- Technical consulting at the company to support the professional in the project
- Supporting calculation programs
- Specific training at the company
- Complete catalogue for every installation need
- Continuous updating of the range
- Single contact person for the entire system, to guarantee cost savings and efficient service
- Single contact person for the entire system
- Complete catalogue for every installation need
- Continuous updating of the range
- Pre-assembled and pre-wired solutions for maximum time savings at installation
- Qualified technical consulting at the company
- Specific training at the company
- System with virtually no maintenance
Products
KLIMA NEW BUILING
KLIMA RENEW
KLIMA DRY
KLIMA WALL
ACCESSORIES, PIPES AND MANIFOLDS
Documentation
Catalogues and leaflets
Technical focus
Certifications
Visit our Download Area to view and download our certifications and homologations.