Sisteme Radiante

Metallic radiant ceilings

In the buildings of the tertiary sector (offices, hospitals, airports, commercial environments, school buildings) a ceiling is often planned, above which systems and service networks can be installed. Making this ceiling the principal element of the air conditioning system makes it possible to optimize its cost and, especially, to benefit from all the advantages offered by radiant technology: considerable comfort and environmental healthiness, consistent energy savings, maximum architectural freedom and enhancement of the surfaces and volumes of the building.

Our metal ceilings, offered in various and customisable aesthetic types, make it possible to create comfortable and extremely efficient air conditioning systems, thanks to their high yield and low thermal inertia.

Overview

Show image

GK Classic

System made of steel sheet composed of active and inactive panels, supported by a 24 mm T-shaped load-bearing structure.
Possibility of creating suspended ceilings with two different modularities: 600x600 mm and 600x1200 mm.
Activated with aluminum thermal diffusers and a hydraulic circuit with copper coil.
Thus allowing to satisfy different thermal output requirements.

Show image

GK Top

System made of steel sheet composed of active and inactive panels, supported by a parallel or crossed load-bearing structure.
Possibility of creating suspended ceilings with two different modularities: 600x1200 mm and 1200x1200 mm.
Activated with aluminum thermal diffusers and a hydraulic circuit with copper coil.
Thus allowing to satisfy different thermal output requirements.

GK Ultra

System made of steel sheet composed of active and inactive panels, supported by a crossed load-bearing structure.
Suspended ceilings modularities: 1524x1524 mm.
Activated with aluminum thermal diffusers and a hydraulic circuit with copper coil.
Thus allowing to satisfy the highest aesthetic and performance standards, both in terms of thermal output and in terms of acoustic performance.

GK-V Ultra

System made of steel sheet composed of active panels, supported by characteristic hidden structures, allowing the creation of radiant island ceilings.
Activated with aluminum thermal diffusers and hydraulic circuit with copper coil and spreading over the entire surface of the TNT layer panel to maximize acoustic comfort.
Thus allowing to satisfy the highest aesthetic performance standards, both in terms of thermal output and in terms of acoustic performance.

Show imageShow image

Connection components and other elements

The following complete our offer for the realization of the radiant system: PB pipes with anti-oxygen barrier, distribution manifolds, adaptors, connection kits formed of butyl flexible pipes with stainless steel braid covering and removable push-fitting connections, rigid spacing suspension structures, thermo-acoustic insulation panels in polyester fibre with combined TNT membrane.

Highlights

Radiant panel GK Top: type C activation with copper coil Ø12 mm.

Radiant panel GK Ultra: type C activation with copper coil Ø16 mm.

Surface finish: panels available in smooth or micro-perforated version.

Possibility of inspection. The radiant ceiling can be opened at any time to have free access to the system located in the plenum and to perform maintenance operations. The panels taken be placed in vertical position also with system in operation; depending on the version, they can rotate around the load-bearing structure to which they are hooked or remain suspended from the structure with special metal cables, after having being removed from their slot. Under no circumstance is traction exercised on the connection pipes.

Integration with other plant engineering. All our systems can be easily integrated with other systems such as lighting devices, air diffusors or loudspeakers. Inactive panels are available equipped with specific pre-punching to avoid holes or breaks at the worksite. The selection of standard modularity makes it possible to use market standard devices and terminals in place of inactive panels. Small devices can be integrated into the load-bearing elements.

For orders of a certain importance, the ceiling GK Ultra can be personalised in terms of modularity, colour (RAL range), opening method and type of material. 

Advantages

  • Maximum environmental comfort (uniform distribution of the horizontal and vertical temperatures, absence of drafts and dust circulation, silent operation)
  • Efficient energy consumption for the entire life of the building (lower comfort temperature compared to that of traditional radiator systems, for an energy savings of 7÷8% for every degree less of the air)
    Ideal climate for all seasons, given that a single system is suitable for heating in the winter and cooling in the summer
  • Thanks to the operation with water at less extreme temperatures, it is ideal in combination with high efficiency generators (such as condensing boilers and heat pumps) and provides efficient use of renewable sources (such as geothermal and solar thermal).
  • Maximum architectural freedom, thanks to the absence of terminals in the room
  • No maintenance
  • For new constructions and restorations in both the residential and tertiary/industrial sectors
  • Single producer to guarantee a wide range of complete, reliable and economical solutions
  • Maximum design and architectural freedom
  • High performing systems (high yield and low thermal inertia), silent and with financial convenience over the span of the entire useful life
  • Compliance with the most recent laws which require the realization of energy efficient buildings, in which the building shell and systems are designed one as a function of the other
  • Large catalogue with standardised solutions
  • Possibility of personalising on special orders
  • Easy integration of room terminals of other engineering
  • Ideal in combination with high efficiency generators, such as condensing boilers and heat pumps
  • Possibility of effective use of renewable sources, such as geothermal and solar thermal
  • Technical consulting at the company to support the professional in the project
  • Supporting calculation programs
  • Specific training at the company
  • Complete catalogue for every installation need
  • Continuous updating of the range
  • Single contact person for the entire system, to guarantee cost savings and efficient service
  • Single contact person for the entire system
  • Complete catalogue for every installation need
  • Continuous updating of the range
  • Panels pre-assembled at the factory to facilitate the installation phase at the worksite
  • System of rapid installation
  • Qualified technical consulting at the company
  • Specific training at the company
  • System with virtually no maintenance, for high operating continuity.

Documentation

Catalogues and leaflets

R004EN Catalogue radiant ceilings

Technical focus

Coming soon. We are currently working on documentation related to this topic.

Certifications

Visit our Download Area to view and download our certifications and homologations.

Reference Projects - Metallic Radiant Ceilings

Show all